Test & Measurement


Oscilloscope enables users to record and control mixed-signals of all kinds

The Digilent Analogue Discovery 2 is a USB oscilloscope and multi-function instrument that enables users to generate, measure, record and control mixed-signals of all kinds. The optional Discovery BNC Adapter Board offers standard BNC probe

RS Components | 25-09-2018

Integrated optical modules offer complete photometric systems for smoke detection

Analog Devices ADPD188BI Integrated Optical Modules provide a complete photometric systems for smoke detection utilising optical dual wavelength technology. The modules combine a highly efficient photometric front end, two LEDs, and two PDs

Analog Devices | 19-09-2018

New series simplifies verification of fibre in high-bandwidth networks

Anritsu Corporation has launched the ACCESS Master MT9085 series of handheld testers offering accuracy and wide measurement capability throughout installation and maintenance of fibre optic cable in LTE and 5G backhaul, as well as Metro and

Anritsu | 18-09-2018

New test and simulation products increase efficiency and productivity

Pickering Interfaces has a new high-accuracy PXI RTD simulator. The device is a cost-effective method of simulating PT100, PT500 or PT1000 RTDs from -150C to >850C. The unit supports 4, 8, 12, 16, 20 or 24 channels in one or two PXI slots.

Pickering | 18-09-2018

New AWGs with advanced features offer silent operation

Saelig Company has two new 16-bit Arbitrary Waveform Generator series from Rigol Technologies. Both series are created with unique SiFi II technology to generate accurate 16-bit standard, and arbitrary waveforms point by point from large in

Saelig | 14-09-2018

Multi-sensor kit boasts Bluetooth and 15 DoF for IoT node applications

Mouser now stocks the SmartBond Multi-Sensor Kit from Dialog Semiconductor. The smallest and lowest power wireless sensor kit on the market, the kit is built on the company's DA14585 SmartBond SoC and integrates TDK InvenSense motion sensor

Mouser Electronics | 13-09-2018

Signal conditioner for resistive sensing with digital and analog outputs

The Texas Instruments PGA305 device provides an interface for piezoresistive and strain-gauge pressure-sense elements. The device is a full SoC solution that combines programmable AFE ADC, and digital signal processing that allows direct co

Texas Instruments | 12-09-2018

New polarised category of machine vision camera sensor

Sony Europe’s Image Sensing Solutions now offers the XCG-CP510, the first in a new category of machine vision cameras. The camera and category is based on the company's newly developed IMX250MZR global shutter CMOS sensor, which uses mo

Sony | 12-09-2018

Industrial videoscopes for equipment inspection applications

RS Components has introduced two rugged diagnostic videoscopes from Fluke that are aimed at maintenance engineers and other professionals wanting to undertake equipment inspections and diagnose problems in a broad assortment of industrial a

RS Components | 10-09-2018

Sampling oscilloscope shortens test times and cuts production costs

Anritsu Corporation has new firmware downloads available for the BERTWave MP2110A Sampling Oscilloscope. The new firmware will increase its PAM4 analysis function from 26 Gbaud to 53 Gbaud targeting production and inspection of optical modu

Anritsu | 05-09-2018

Versatile sensor hub can connect serialised sensor data from four video data streams

The Texas Instruments DS90UB962-Q1 is a versatile sensor hub capable of connecting serialised sensor data received from four independent video data streams through an FPD-Link III interface. When paired with a DS90UB935A-Q1, DS90UB953-Q1, D

Texas Instruments | 04-09-2018

Evolution of a test system to support 5G new radio

Anritsu Corporation has introduced the ME7834NR test system to support PCT and CAT of terminals incorporating the 5G NR technology. The system will add support for 3GPP TS 38.523 test cases for all configurations of 5G NR, including both NS

Anritsu | 04-09-2018

Thermal imaging camera ideal for detecting HVAC problems and water damage

The FLIR ONE Pro LT has the power to identify problems quickly and ensure that you repaired them correctly. The device is available now from RS Components. With the enhanced resolution of FLIR VividIR processing, the added perspective of FL

RS Components | 03-09-2018

Industrial sensor solution provides environmental sensing in Industry 4.0 applications

Now in stock at Mouser is the Connected Industrial Sensor Solution (CISS) from Bosch. The CISS is a robust, multi-sensor device designed to enable IoT applications in harsh environments, using MEMS technology to identify vibration and accel

Mouser Electronics | 03-09-2018

Articles