Semiconductors


MCUs for automotive and industrial radar applications

NXP Semiconductor S32Rx radar MCUs are 32-bit Power Architecture-based MCUs for automotive and industrial radar applications. These MCUs provide long-range, high-resolution, and accuracy for safety-critical radar applications. The MCUs sati

Mouser Electronics | 19-10-2018

ESD protection diodes offer low dynamic resistance and low clamping voltage

Texas Instruments ESD351 1-Channel 30kV ESD Protection Diodes are uni-directional and provide low dynamic resistance RDYN and low clamping voltage. The device is rated to dissipate ESD strikes up to 30kV (contact and air) level. This is per

Texas Instruments | 18-10-2018

CPU packs a punch in 4K video systems

The newest addition to BVM Limited’s extensive portfolio of industrial grade Mini-ITX embedded SBCs is the very powerful and fully-featured LV-67W, which is based on Intel’s latest 8th Generation 14nm Coffee Lake H Series Core i7/i5/i3 proc

BVM | 17-10-2018

Satellite subsystem delivers ultra-high spaceflight performance in small package

Renesas Electronics has announced the ISL70591SEH and ISL70592SEH radiation-hardened precision current sources created to give current excitation to over 300 resistive sensors that monitor the health of a satellite’s subsystems. The two new

Renesas | 17-10-2018

Microcontroller offers a scalable and reconfigurable platform architecture

The Cypress Semiconductor PSoC 4 (Programmable Embedded System-on-Chip) family, available now from RS Components, contains an ARM Cortex-M0 processor. Both product families use 4100 and the 4200 platform architecture featuring a combination

RS Components | 16-10-2018

Digital controller provides a multi-functional interface between user electronics and DMD

Texas Instruments DLPC3432 Digital Controller is a part of the DLP230GP (.23 qHD) chipset that maintains stable operation of the DLP230GP digital micromirror device (DMD). The controller offers a convenient, multi-functional interface betwe

Texas Instruments | 15-10-2018

TVS ESD protection diode array designed for high-speed applications

Texas Instruments ESD224 TVS ESD Protection Diode Array is a bidirectional array designed for high-speed applications including USB 3.0 and HDMI 2.0. The device is rated to dissipate ESD strikes at the maximum level defined in the IEC 61000

Texas Instruments | 11-10-2018

Energy metering ICs for next-generation smart meter systems

The Analog Devices ADE9xxx energy metering ICs is perfect for satisfying the demands of next-generation smart metering applications. The ICs provide highly accurate measurements of apparent energy (kVA), active energy (kWh), reactive energy

Analog Devices | 11-10-2018

SoC significantly improves device reliability

Texas Instruments 66AK2G1x KeyStone II SoC addresses applications that demand both DSP and Arm performance, with the integration of high-speed peripherals and memory interfaces. This SoC also incorporates hardware acceleration for network a

Texas Instruments | 09-10-2018

High-reliability wireless solutions for tough industrial IoT environments

Analog Devices' SmartMesh IP Wireless Solutions from the Dust Networks product group are embedded chips and pre-certified PCB modules. These modules are supplied complete with fully developed, field-proven, intelligent wireless mesh network

Mouser Electronics | 08-10-2018

TVS ESD protection diode array designed for HDMI and USB surge protection

Texas Instruments' ESD204 TVS ESD Protection Diode Array is a bidirectional array designed for HDMI and USB surge protection up to 5.5A (8/20µs). The device is rated to dissipate ESD strikes at the maximum level specified in the IEC 61000-4

Texas Instruments | 08-10-2018

Battery charger EVM designed to help evaluate boost-mode charger

Texas Instruments bq25882EVM-001 Battery Charger Evaluation Module is designed to help easily evaluate the bq25882 boost-mode battery charger. Charging two-cell, 8.4V+ battery packs from a legacy 5V USB port demands a boost charger. The

Mouser Electronics | 04-10-2018

DC brushed motor IC includes current limit detection

Toshiba Electronics Europe has launched an integrated dual H-bridge DC brushed motor driver IC that incorporates an output current limit function rated at 50V/3A. The new TB67H401FTG device is ideal for any application where monitoring and

Toshiba | 04-10-2018

New DSC accelerates DSP performance for time-critical control applications

Microchip has released a new family of dsPIC33CK 16-bit DSCs which provide system designers with DSP power combined with the design simplicity of an MCU. Created to provide faster deterministic performance in time-critical control applicati

Microchip Technology | 02-10-2018

Articles