Power


Fast charging is possible with only one EMC filter

Schaffner has released the new FN2220 EMC filter developed to satisfy the necessities of EV fast-charging systems. The fast-growing adoption of EVs worldwide is followed by growing demand for charging stations. To top-up EV batteries whe

Schaffner EMV AG | 06-01-2022

New dual N-channel MOSFET designed for LIB charging and discharging switches

New Yorker Electronics now offers the new Good-Ark Semiconductor SSF2418E 6A/20V Dual N-Channel MOSFET with ESD protection in the SOT-23-6L package. The device uses the latest trench technologies and advanced process techniques to attain ex

New Yorker Electronics | 06-01-2022

HVC offerings extended with new compact high-voltage contactors

TDK Corporation has enlarged its range of bipolar DC high-voltage contactors to incorporate the new HVC43 (B88269X3**0C011) series. These products complete the current range by delivering continuous currents from 150ADC to 250ADC and operat

TDK | 05-01-2022

Battery protection ICs ensure safety against overcharge

Ricoh Electronic Devices Company R5617 Series Battery Protection ICs, available now from Mouser, provide overcharge, over-discharge, and charge/discharge overcurrent protection for one-cell Li-ion and polymer batteries. The ICs provide a

Mouser Electronics | 04-01-2022

Quad output power supply meets medical and industrial/ITE standards

SL Power Electronics offers the GB130Q family of highly efficient, 130W quad output power supplies in a 3" x 5" open frame form factor. Rich in features and explicitly developed for next-generation applications, the screw-less design w

SL Power | 17-12-2021

New flyback switcher ICs slash energy waste in appliance power supplies

Power Integrations has released the highly integrated InnoSwitch3-TN off-line CV/CC flyback switcher IC. Provided in a safety-qualified, compact MinSOP-16A package and including a 725V primary MOSFET, isolated feedback, synchronous rectific

Power Integrations | 15-12-2021

High-performance and low power-loss MOSFETs for server and telecom applications

onsemi has released its new 600V SUPERFET V family of MOSFETs. The high-performance devices allow power supplies to satisfy pressing efficiency regulations such as 80 PLUS Titanium, particularly at the highly challenging 10% load condition.

ON Semiconductor | 15-12-2021

Programmable smart gate driver for BLDC motor applications reduces BOM

Renesas Electronics Corporation has released the RAA227063 Smart Gate Driver for BLDC motor applications. The new device is programmable through an SPI interface, supporting motors with rotor position sensors and sensorless applications. It

Renesas | 15-12-2021

Two new NiMH models to versatile battery charger family

Mascot has extended its 3743 and 3546 range of versatile, high-performance Blueline charger models to include new NiMH versions. The two new models are configurable and employ smart logic to optimise battery performance, incorporating robus

Mascot | 14-12-2021

Rail approved DC-DC offers high performance in a small package

Available now from Luso Electronic Products, the P-Duke have released the RCD30W series, a 30W high-performance DC-DC converter created for ruggedised railway and industrial applications. It extends its railway converter range of 10W to 20W

Luso | 13-12-2021

Pre-drivers combine small size with high performance

Melexis has released new LIN BLDC-motor pre-drivers that incorporate small size with high performance and power capability for automotive mechatronic applications. The MLX81340 (32KB Flash) and MLX81344 (64KB Flash) integrate three high-sid

Melexis | 13-12-2021

Silicon carbide stack solution that drives performance and cost efficiencies

Mersen’s three-phase SiC Power Stack Reference Design offers system designers a complete, compact, high-power silicon carbide solution with no need for individual device sourcing, testing and qualification. The design incorporates Microchip

Microchip Technology | 10-12-2021

Surface-mount compact high efficiency DC-DC converters with wide input ranges

RECOM has added the RSH2 series to its DC-DC converter range. The series offers a fully regulated, low noise, isolated 2W DC-DC converter in a surface mount package. The series provides nominal inputs of 3.3V (2.8-5.5V), 5V/9V (4.5-13.2V),

Recom International | 10-12-2021

Rack-mount DC power supplies ideal for integrating into component test systems

Teledyne LeCroy T3PS Rack-Mount DC Power Supplies, available now from Mouser, are single-power output DC programmable power supplies with an output range from 1200W to 1520W. The series is ideal for electronic component manufacturers to

Mouser Electronics | 07-12-2021

Articles