Power


Acquisition expands condition-based monitoring offerings for Industry 4.0

Analog Devices has acquired Test Motors, a company specialising in predictive maintenance of electric motors and generators. The company is based in Barcelona, Spain, offering products and services that detect faults in electric motors befo

Analog Devices | 07-11-2019

DC-DC converters maximise performance and cost-efficiency

Available now from Mouser, the TRACO Power TEN 40E and TEN 40WIE 40W DC-DC Converters were designed to maximise performance, reliability and cost-efficiency in the industry-standard 2" x 1" footprint. The converters feature six-sided metal

Mouser Electronics | 07-11-2019

Digital Class-D audio amplifiers provide a cost-effective digital input solution

Texas Instruments TAS5806MD Digital Closed-loop Class-D Audio Amplifiers provide a cost-effective digital input solution featuring low power dissipation and sound enrichment. The device gives an integrated audio processor and 96kHz architec

Texas Instruments | 07-11-2019

Embedded switch mode power supply offers a long product life expectancy

The TDK Lambda GXE600 Switching Power Supplies, available now from RS Components, are single output 600W programmable medical and ITE power supplies. These power supplies provide constant current modes, constant voltage, monitoring, and pro

RS Components | 06-11-2019

Compact power line EMC filter family for lighting equipment

Schaffner has introduced a new single-phase EMC filter. With a 350VAC rating, the filter can be employed in typical single-phase applications (120VAC and 230VAC), or industrial applications when using phase to neutral voltage off three-phas

Schaffner EMV AG | 06-11-2019

DC-DC converters deliver high efficiency and a low ripple voltage

Torex Semiconductor Ltd has launched the XD9267/XD9268 Series of AEC-Q100 Compliant, 600mA synchronous step-down DC-DC converters with an internal 36V operation driver transistor. The input voltage range is 3V to 36V (absolute maximum ra

Torex Semiconductor | 06-11-2019

Four-phase DC-DC expander improves load current ability

Analog Devices LT8550 Four-Phase DC-DC Expander is a multi-phase expander for synchronous buck DC-DC converters. The device works in tandem with any buck DC-DC converter to improve the load current ability by adding extra phases, which are

Analog Devices | 05-11-2019

PoE PSE engineered to insert power into Ethernet cables to IEEE standards

Texas Instruments TPS23881 Eight-Channel Power-Over Ethernet PSE is a power sourcing equipment controller engineered to insert power into Ethernet cables per the IEEE 802.3bt standard. The eight different power channels can be configured in

Texas Instruments | 05-11-2019

Precision zero-drift op-amp ideal for precision instrumentation and signal measurement

Texas Instruments TLV2186 Precision Zero-Drift Operational Amplifier is a low-power, 24V, rail-to-rail input, and output zero-drift op-amp. The device provides only 10µV of offset voltage (typical), and 0.1µV/C of offset voltage drift over

Texas Instruments | 04-11-2019

Synchronous buck converters deliver high efficiency across all loads

Diodes Incorporated has introduced five synchronous buck converters with integrated high- and low-side MOSFETs, providing PoL solutions with a continuous output current of either 3.5A or 5A. The devices provide proprietary gate driver techn

Diodes Inc | 04-11-2019

High-voltage regulated DC power supplies with reinforced isolation

RS Components has introduced the new TRI Series of high-voltage regulated DC-DC converters from power supply specialist TRACO Power. Aimed principally at electronic engineers designing IT equipment for industrial, instrumentation and transp

RS Components | 31-10-2019

Isolated flyback converter removes the need for third winding or an opto-isolator

Analog Devices LT3001 36V 4W Isolated Flyback Converter is created to sample isolated output voltage directly from the primary-side flyback waveform, eliminating the need for third winding or an opto-isolator for regulation. Output voltage

Analog Devices | 30-10-2019

Isolated DC-DC converter designed to provide a low-cost solution

The Traco Power TBA 1HI is an elementary 1W DC-DC SIP converter series which is designed to provide a low-cost solution with no compromise on quality and lifetime. The new design enhances the industry-standard features and provides an integ

RS Components | 29-10-2019

Digital-to-analog converter suits industrial automation

Analog Devices AD5679R 16-Bit Digital-to-Analog Converter is a low power, 16-channel, buffered voltage output, a digital-to-analog converter that includes a 2.5V, 2ppm/C internal reference (enabled by default). This device also includes a g

Analog Devices | 28-10-2019

Articles