Power


Half-bridge driver for automotive, industrial and telecommunication fields

Analog Devices LTC7060 Half Bridge Driver drives N-channel MOSFETs in a half-bridge configuration with supply voltages up to 100V. It features supply independent three-state PWM input logic. The unique floating architecture makes the gate d

Analog Devices | 30-04-2020

Step-down converters give optimal efficiency and output voltage accuracy

Texas Instruments LMR36520 Simple Switcher Step-Down Converters provide integrated high-side and low-side power MOSFETs, with output current up to 2A provided over a broad input voltage range of 4.2V to 65V. The transient tolerance up to 70

Texas Instruments | 30-04-2020

Extended DC-DC converter solutions for industrial use

Flex Power Modules has added to its range of miniature, isolated DC-DC converters designed for industrial applications with the launch of the PUB-2M series. Producing an output power of up to 2W with no minimum load needed, the high-perform

Flex Power Module | 30-04-2020

Low noise op-amp delivers significant performance enhancements

Texas Instruments OPA818 Low Noise Op-Amp is a decompensated, voltage-feedback operational amplifier for high-speed and wide dynamic range applications. The op-amp has a low-noise JFET input stage that connects high gain-bandwidth with a br

Texas Instruments | 29-04-2020

Expanded line up of N-channel MOSFET for general purpose applications

Torex Semiconductor has launched six new products of XP23 series (30V withstand voltage) and XP26 series (60V withstand voltage) for MOSFET. The products which released this time are general-purpose N-channel MOSFET with low on-resistanc

Torex Semiconductor | 29-04-2020

Long-life 24V battery modules for industrial applications

Murata has produced an all-in-one 24V standard battery module, that is excellent for any industrial equipment needing high levels of output such as AGV) and robots. The FORTELION 24V battery module is furnished with FORTELION, the company's

Murata | 29-04-2020

Rail-to-rail output op-amps for high dynamic range applications

Analog Devices LTC6226/LTC6227 Rail-to-Rail Output Op-Amps are extremely fast, low noise, unity-gain stable single/dual op-amps, with a gain-bandwidth product of 420MHz and a slew rate of 180V/μs. The low input-referred voltage noise of onl

Analog Devices | 28-04-2020

PCB mount switching regulator ideal for IoT and battery-powered applications

The RS Components RS PRO K78 range Switching Regulators are a series of wide input voltage non-isolated and regulated singe output converters. These switching regulators are high-quality, direct replacements for the LM78 series three-termin

RS Components | 28-04-2020

Full-wave fan motor drivers for general consumer equipment

ROHM Semiconductor BD612xx Full-Wave Fan Motor Drivers, available now from Mouser, are multi-function and single-phase motor drivers. These drivers control speed by PWM input and provide PWM soft switching, lock protection, and aut

Mouser Electronics | 28-04-2020

DC-DC step-down power module is a non-isolated complete power supply

Renesas Electronics RAA210610 DC-DC Step-Down Power Module, available now from Mouser, is a non-isolated complete power supply created to produce up to 15A of continuous current. This power module functions from a single 7V to 54V wide inpu

Mouser Electronics | 27-04-2020

Ultra-tiny MOSFETs offer an easy-to-use package for wearables

Nexperia has released a range of MOSFETs in the ultra-small DFN0606 package for mobile and portable applications including wearables. The devices also provide the lowest RDS(on) for their size and employ the commonly used pitch of 0.35mm to

Nexperia | 27-04-2020

Energy meters enable remote monitoring of equipment and facilities

Phoenix Contact EMpro II Energy Meters offer user-friendly functions that measure and transmit key energy parameters to cloud-based services, allowing the remote monitoring of machines, equipment, and facilities. A three-step wizard automat

Mouser Electronics | 24-04-2020

New cost-effective low-profile panel mount PSU series

Delta have announced that its PMT2 panel mount power supply series now provides power ratings of 35W, 50W, 75W, 100W, 150W, 350W single output models and a 75W dual output. These devices are available now from Luso Electronics. The singl

Luso | 24-04-2020

DC input DIN rail power supplies have a wide input range and output adjustment

TDK Corporation has introduced the TDK-Lambda brand DDA series of DIN rail mounted DC-DC power supplies. Using the company’s i6A non-isolated step-down power modules, the units can receive a broad range DC input of up to 9VDC to 53VDC and p

TDK | 24-04-2020

Articles