Automotive & Transport


Automotive-compliant ReDriver enables DisplayPort via USB Type-C

Diodes Incorporated has released what is claimed to be the industry's first automotive AEC-Q100 grade 3 qualified 10Gbps USB-C DP-Al) mode linear ReDriver IC. The DP-Alt mode enables the transfer of DisplayPort signals through a USB Type-C

Diodes Inc | 26-05-2020

Compact module brings easy access to V2X

U-blox announced its latest contribution to vehicle-to-everything (V2X) technology: the VERA-P3 V2X module. Based on the company's UBX-P3 V2X chip, VERA-P3 puts automotive OEMs, Tier-1s, and manufacturers of traffic management infrastructur

U-Blox | 22-05-2020

Miniaturised common-mode chokes for automotive Ethernet

TDK Corporation has released the ACT1210G-800-2P, a new type of common-mode choke that complies to the standards of the OPEN Alliance (One-Pair Ether-Net) for 1000BASE-T1. Due to the high values of the S-parameters, a high amplitude ratio i

TDK | 22-05-2020

Automotive MOSFETs for engine management and body systems

Vishay/Siliconix SQJA Automotive MOSFETs, available now Mouser, are N-channel/P-channel TrenchFET power MOSFETs. These automotive MOSFETs are AEC-Q101 qualified, and 100% Rg and Unclamped Inductive Switching tested. The SQJA MOSFETs are off

Mouser Electronics | 19-05-2020

High-temperature polymer for the automotive industry

AVX provides a wide portfolio of Automotive Solid Electrolytic Capacitors in various product families. These devices are available now from TTI Europe. Each of these technologies brings individual features to best suit the particular demand

TTI Europe | 19-05-2020

Cooled charging cable system enables continuous electric vehicle charging

HUBER+SUHNER has launched the RADOX HPC500 – a new addition to the RADOX high power charging portfolio. It is claimed to be the world’s first cooled charging cable system that provides continuous charging at 500A even in high-temperature en

HUBER+SUHNER | 18-05-2020

New P-channel MOSFETs in robust and space-saving package

Nexperia has released what is claimed to be the industry’s first family of P-channel MOSFETs in a robust, space-saving LFPAK56 (Power-SO8) package. The new devices are AEC-Q101 qualified for automotive applications and are an ideal replacem

Nexperia | 14-05-2020

Driverless step-down controller qualified for automotive applications

Texas Instruments TPS59632-Q1 Three-Phase Driverless Step-Down Controller comes with advanced features such as D-CAP+ control architecture with output voltage OSR and USR. This gives a very fast transient response, low output capacitance, a

Texas Instruments | 07-05-2020

Synchronous buck FET drivers optimised for CPU VCORE applications

Texas Instruments TPS59603-Q1 Synchronous Buck FET Drivers are optimised for high-frequency CPU VCORE applications. These advanced features such as decreased dead-time drive and auto-zero crossing are utilised to optimise efficiency over th

Texas Instruments | 06-05-2020

Ultra-reliable and highly accurate IMU sensor for guidance solutions

ACEINNA has announced availability of its new IMU383ZA, which integrates triple-redundant, three-axis MEMS accelerometer and gyroscope sensors. This miniature module is factory-calibrated over the -40C to +85C industrial temperature range,

ACEINNA | 04-05-2020

Expanded portfolio for industrial motor drive applications

ON Semiconductor has expanded its portfolio for industrial motor drive applications, to further help customers solve their specific design challenges. Motor drive systems are increasing along with industrial automation and robotics. Thes

ON Semiconductor | 30-04-2020

Automotive highside LED driver meets multiple regulation demands

Texas Instruments TPS929120-Q1 Automotive 40V High-Side LED Driver with FlexWire interface is a 12-channel, 40V high-side LED driver controlling the 8-bit output current and 12-bit PWM duty cycles. The device satisfies multiple regulation r

Texas Instruments | 28-04-2020

New high-power speaker amp ICs for advanced instrument clusters

ROHM Semiconductor has released its new AEC-Q100 qualified 2.8W output Class AB monaural speaker amplifiers the BD783xxEFJ-M series (BD78306EFJ-M, BD78310EFJ-M and BD78326EFJ-M) perfect for instrument clusters - employed in vehicles furnish

ROHM Semiconductor | 28-04-2020

New technologies reduce board area in automotive LED lamp systems

ROHM recently announced the its new 4ch linear LED driver ICs with built-in MOSFET for LED rear lamps (turn/stop), fog lamps and turn signals for automotive use. In response to the demands in India, the largest market for two-wheeled veh

ROHM Semiconductor | 21-04-2020

Articles