Power


New AC/DC solid-state power distribution unit saves size and cost

Data Device Corporation has released AC/DC solid-state power distribution unit providing significant Size, Weight, Power and Cost savings by consolidating both 115VAC and 28VDC functionality, with high power density, into a single ruggedise

Data Device Corporation | 20-12-2019

ModBUS-TCP interface option added to programmable DC power supply series

TDK Corporation has introduced a ModBUS‑TCP interface option to the GENESYS+ series of programmable DC power supplies. The option is offered on all models extending from the 1U high half-rack GH1.5kW to the 3U high full rack GSP15kW. The in

TDK | 20-12-2019

Ultra-high CMTI isolated gate drivers for driving SiC or GaN transistors in multiple applications

Maxim MAX2270x Ultra-High CMTI Isolated Gate Drivers, available now from Mouser, are single-channel isolated gate drivers with ultra-high CMTI of 300kV/μs (typ). The devices are intended to drive SiC or GaN transistors in multiple inverter

Mouser Electronics | 19-12-2019

High voltage mini DC-DC converter ideal for biomedical and analytical applications

The HMV RK Series is the newest member of the mini high voltage DC to DC converter families. The device is available now from Luso Electronics. It is simple to use and needs no external components, saving space. It provides exceptional load

Luso | 18-12-2019

DC-DC converters ideal fit for very high voltage isolation applications

RECOM has launched its RHV2 and RHV3 series of certified, ultra-high isolation DC-DC converters with single and dual outputs rated at 2W or 3W in a compact SIP16 package. The series feature ultra-high isolation ratings of 12.5kVAC/one mi

Recom International | 18-12-2019

Higher battery capacity and longer life for small medical and personal electronics

The Texas Instruments BQ25619 supports a termination current of 20mA and enables 7% higher battery capacity and longer run time, in comparison to other devices in the industry. The device provides three-in-one boost converter integration an

Texas Instruments | 17-12-2019

Highly integrated regulators reduce power usage while speeding design time

Analog Devices offers the LTM4668 and LTM4668A µModule regulators, quad-output DC-DC regulators with up to 4.8A output capability. The new devices combine switching controllers, inductors, power FETs and support components, relieving the de

Analog Devices | 17-12-2019

Common-drain dual N-Channel MOSFET increases power density and efficiency

Vishay Intertechnology offers a new common-drain dual n-channel 60V MOSFET in the compact, thermally enhanced PowerPAK 1212-8SCD package. Designed to increase power density and efficiency in battery management systems, plug-in and wireless

Vishay | 16-12-2019

Ultra-compact desktop power supply features GaN switching

FiDUS Power sets a new bar for the size of external power supplies with the release of the new GDA200. The use of GaN rather than silicon semi-conductor switches offers enhanced efficiency, decreased heat losses and operation a higher-frequ

FiDUS | 16-12-2019

Step-down converter provides an efficient and high power-density solution

The Texas Instruments TPS62864/6 devices are 5.5V, 6A synchronous step-down converters with I2C interface measuring only 1.05mm x 1.78mm WCSP package. These high-frequency synchronous step-down converters with I2C interface provide an effic

Texas Instruments | 13-12-2019

New series of embedded switch mode power supply SMPS is medical-approved

The Artesyn Embedded Technologies LCC600 series of fully enclosed conduction-cooled AC/DC power supplies incorporate four models, providing main output voltages of 12V, 28V, 36V or 48V. The series is available now from RS Components. Eac

RS Components | 12-12-2019

FET-input op-amp delivers significant performance enhancements

The Texas Instruments OPA810 is a single-channel, FET-input, voltage-feedback operational amplifier with bias current in the pA range. The device is unity-gain stable with a small-signal, unity-gain bandwidth of 140MHz, and provides ex

Texas Instruments | 12-12-2019

Bidirectional current sense amplifier for monitoring currents

Analog Devices LT1999 Bidirectional Current Sense Amplifier is intended to monitor bidirectional currents over an extensive common-mode range. The device is provided in three gain options (10V/V, 20V/V, and 50V/V). The device senses current

Analog Devices | 11-12-2019

Non-isolated DC-DC converters can operate from a wide input voltage range

Sager Electronics now stocks TDK-Lambda’s i6A4W non-isolated DC-DC converter series. Capable of working from a wide input voltage of up to 9V to 53V, the company's i6A4W step-down converters provides an output voltage that can be altered

Sager Electronics | 11-12-2019

Articles