Power


USB Type-C compliant high power transmission technology for powering PCs and TVs

Rohm has developed a new class of power receiver controller ICs compatible with the latest USB Power Delivery (Rev2.0) and Type-C (Rev1.1) standards. The BM92TxxMWV series supports not only conventional USB power supply up to 7.5W, but the

ROHM Semiconductor | 18-09-2015

Highest power density DC-DC converter in a SIP package

Power Sources Unlimited (PSU) has announced availability of the new Traco Power TMR 9 and TMR 9WI Series which are the world’s first DC-DC converters in a SIP-8 package that provides an isolated and regulated output voltage delivering 9W of

PSU | 18-09-2015

Galvanically isolated analog amplifiers feature low-voltage differential input

Available now from Mouser, Silicon Labs' Si8920 galvanically isolated analog amplifiers feature a low-voltage differential input making them ideal for measuring voltage across a current shunt resistor or for any place where a sensor must

Mouser Electronics | 18-09-2015

Step-down 2.5A regulators integrated MOSFET to drive high-current LEDs

This post is sponsored by Texas Instruments. The Texas Instruments (TI) TPS92512/HV are 2.5A step-down (buck) current regulators with an integrated MOSFET to drive high current LEDs. Available with 42V and 60V (HV) input ranges, the LE

Texas Instruments | 17-09-2015

Isolated 10W DC-DC converters in compact packages replace larger types pin for pin

Mouser now stocks Traco Power's THL 10 Series 10W isolated DC-DC converters which are packed in a compact 1 x 1 inch case and are a pin-to-pin replacement for popular 1 x 2 inch size products. The industrial standard pinout, the wide 2

Mouser Electronics | 16-09-2015

Bi-directional zero-drift current-shunt monitors

Texas Instruments' INA21x bi-directional zero-drift current-shunt monitors are now available from Mouser stock. The voltage-output device monitors can sense drops across shunts at common-mode voltages from -0.3V to 26V. This is done ind

Mouser Electronics | 16-09-2015

New DC-DC converter for inputs ranging from a single-cell Li-Ion to automotive

Linear Technology has announced the LT8330, a current-mode, 2MHz step-up DC-DC converter with an internal 1A, 60V switch. It operates from an input voltage range of 3V to 40V, making it suitable for applications with input sources ranging f

Linear | 15-09-2015

New 1MHz / 2A DC-DC buck converter enables efficient compact designs

The new AP3402, AP3419 and AP3429 DC-DC step-down converters from Diodes Incorporated operate from inputs of 2.7V to 5.5V to supply loads up to 2A, with great efficiency under both light and heavy load conditions. A high switching freque

Diodes Inc | 15-09-2015

Versatile high-voltage switchers integrate a fixed frequency current mode

Integrating a fixed frequency current mode controller with a 700V MOSFET, ON Semiconductor's NCP1x high-voltage switchers are now stocked by Mouser. The devices offer a high level of integration, including soft-start, frequency-jitteri

Mouser Electronics | 15-09-2015

Industry's first charger interface IC compatible with Quick Charge 3.0

Power Integrations announced its newest member of the ChiPhy charger-interface IC family CHY103D, the first IC for off-line AC-DC chargers compatible with the Quick Charge (QC) 3.0 protocol from Qualcomm Technologies, Inc., a subsidiary

Power Integrations | 15-09-2015

Board-mount isolated DC-DC converter provides dual port USB data isolation

Murata's NMUSB202MC surface-mount DC-DC converter module is now available from Farnell element14. The unit conveniently provides dual port USB data isolation from a single upstream port with full power (500mA) available from each downst

Farnell element14 | 14-09-2015

High-quality low-noise supplies target harsh-environment applications

Mean Well's HEP-100/150/185 harsh-environment power supply is now available from Mouser stock. The low-noise high-grade AC/DC power supply series is designed to operate in extreme conditions and temperatures. The HEP-100/150/185 units

Mouser Electronics | 14-09-2015

First industrial-rated Power-over-Ethernet midspans

Microsemi has announced availability of the PD-9001GI and PD-9501GI Power-over-Ethernet (PoE) midspan injectors, expanding its proven PoE offering into new industrial and outdoor applications. The PD-9001GI and PD-9501GI industrial PoE mids

MicroSemi | 14-09-2015

Integrated automotive inductive-load driver reduces space and cost

Designed for automotive inductive load-switching applications, such as window, door latch and antenna relays, solenoids and small DC motors, the DMN61D8LVTQ dual-channel inductive-load driver has been introduced by Diodes Incorporated. T

Diodes Inc | 09-09-2015

Articles