Power Sources Unlimited offers a range of DC-DC converters designed specifically for railway applications from Cincon Electronics. All models meet EN 50155 railway standard and feature ultra-wide input range with a 110VDC nominal input. The
PSU | 31-10-2016
Mouser now stocks the Protected Switch Shield with PROFE™ 24V for Arduino from Infineon Technologies. The Protected Switch Shield is a power switch evaluation board compatible with Arduino microcontroller boards and with Infineon’s XMC micr
Mouser Electronics | 31-10-2016
Linear Technology has introduced the LTM4643 quad output step-down µModule (power module) regulator, configurable as a single output (12A), dual (6A and 6A or 9A and 3A), or quad (3A each) regulator in a 9mm x 15mm x 1.82mm ultrathin LGA pa
Linear | 31-10-2016
With a comprehensive portfolio of USB-compliant ICs, Texas Instruments has introduced five new USB Type-C and Power Delivery (PD) devices that enable engineers to design USB Type-C electronics with better signal quality and protection again
Texas Instruments | 28-10-2016
Electropages Podcasts
Stocked by Farnell element14, the A Series is a new line of ultra-miniature, DC to HV DC converters that set an industry standard in high voltage miniaturisation. This unique package occupies less than one tenth of a cubic inch of volume *5
Farnell element14 | 28-10-2016
TDK have introduced a five-year warranty EVS series of constant current power supplies. Two power levels are offered: a fan cooled 600W and a convection cooled 300W. These compact power supplies are suitable for water purification systems
TDK | 28-10-2016
The Murata NXE1 series of cost effective, high reliability, high isolation, automated manufacture, 1W surface-mount 1 Watt DC-DC converters which include 3.3V and 5V inputs and output voltages of 3.3V and 5V. They are available now from TTI
TTI Europe | 27-10-2016
Powerbox has introduced a new product within its automotive line - the Smart DC-DC ENA200-Charger. Designed to meet new market requirements for intelligent and flexible charging solutions for automotive and industrial demanding applications
Powerbox | 27-10-2016
The Texas Instruments UCD9090A is a 10-rail PMBus/I2C addressable power supply sequencer and monitor. The device integrates a 12-bit ADC for monitoring up to 10 power supply voltage inputs. Twenty-three GPIO pins can be used for power suppl
Texas Instruments | 25-10-2016
The NCP81243 dual output three plus two phase buck solutions, stocked by Farnell element14, are optimised for Intel IMVP8 CPUs. The device offer five PWM drive signals that can be configured in multiple setups. The controller combines true
Farnell element14 | 25-10-2016
The OPA2325 device from Texas Instruments is a dual, precision, low-voltage complementary metal oxide semiconductor (CMOS) operational amplifier optimised for very low noise and wide bandwidth when operating on a low quiescent current of on
Texas Instruments | 24-10-2016
Delta Electronics has added a new 24V/20A output to the CliQ M series of DIN-rail power supply. The series has the highest power density among the family and also the first series in the family to feature advanced power boost (APB). APB wor
Delta | 24-10-2016
Mouser now stocks QUINT4 power supply units from Phoenix Contact. These fourth-generation supplies provide fully customisable solutions to meet evolving system demands in process industries, machine building, and other industrial applicatio
Mouser Electronics | 24-10-2016
Stocked by Digi-Key, Adafruit has designed a breakout board for ISSI’s IS31FL3731 I²C LED driver chip. The chip has the ability to PWM each individual LED in a 144-LED matrix, providing the ability to have beautiful LED lighting effects whi
Digikey | 21-10-2016
Articles
26-06-2025 | In The News | By Robin Mitchell
24-06-2025 | Insights | By Robin Mitchell
23-06-2025 | In The News | By Matthew Walker