Power


Digital signal processors for automotive audio applications

Available from Digi-Key, Analog Devices’ ADSPSC58X and ADSP-2158X family of dual core 450MHz SHARC DSP come with and without single ARM Cortex-A5 processors. Each part comes with SHARC SRAM with up to 640kB. Ideal applications include a

Digikey | 25-01-2017

High quality safety isolating transformers for harsh conditions

RS Components RS Pro is a continuously rated single phase transformer. These safety site transformers are high quality, UK manufactured to BSEN 61588 and fully compliant with reduced low voltage regulations. Encased in a robust GRP encl

RS Components | 25-01-2017

Transceivers significantly improves bus bandwidth utilization

Analog Devices has three enhanced automotive audio bus (A2B) transceivers for distributing audio and control data plus clock and power over a single, unshielded twisted-pair (UTP) cable. The AD242x series of A2B transceivers offers a flexib

Analog Devices | 25-01-2017

Compact feature rich high voltage eFuses with additional protection features

Available now from Farnell element14, the TPS2660x devices from Texas Instruments are compact, feature rich high voltage eFuses with a full suite of protection features. The wide supply input range of 4.2V to 55V allows control of many popu

Farnell element14 | 24-01-2017

Automotive qualified, CMOS operational amplifier ideal for high impedance sensor interfaces

The Texas Instruments’ TLV316-Q1 (single), TLV2316-Q1 (dual), and TLV4316-Q1 (quad) devices comprise a family of general-purpose, low-power operational amplifiers. Features such as rail-to-rail input and output swings, low quiescent current

Texas Instruments | 24-01-2017

Dual port SLIC protectors guard against lightning induced surge and power fault events

Available now from Mouser, the Littelfuse B61089QDR and B9110DF are dual port Subscriber Line Interface Circuit (SLIC) protectors. B61089QDR protects two different SLIC tip/ring pairs with independent voltage tracking for each pair. B61

Mouser Electronics | 23-01-2017

Digi-Key – Compact string pot features output signal voltage divider

Stocked by Digi-Key, the TE Connectivity Measurement Specialties' compact string pot with ‘voltage divider’ output provides ease-of-use and flexibility for measurement ranges up to 50". Made of rugged polycarbonate, the SP1 fits in small sp

Digikey | 23-01-2017

New high-voltage microsize power supplies

New Yorker Electronics is now distributing the new Dean Technology PMT Series of adjustable Microsize DC-DC High Voltage Power Supplies. The new series offers standard inputs of 12V, 15V and 24V, and outputs of up to 1500V and up to 1W. Thi

New Yorker Electronics | 23-01-2017

Battery charger extends backup battery life of automotive ecall systems

Intersil has announced the ISL78693, a 3.6V single-cell battery charger that extends the life of Lithium Iron Phosphate (LiFePO4) batteries used in automotive emergency call (eCall) systems. The battery charger offers up to 4x lower leakage

Intersil | 23-01-2017

New open frame power supply with 3"x5" footprint

Delta Electronics has added the PJT-27V150WBNA to the PJT series of open frame power supplies. The device offers 27V/5.55A output and built-in standby output 12V/0.5A. The 3”x5” product comes with universal AC input voltage range at 90VAC t

Delta | 23-01-2017

Breakthrough GaAs MMIC wideband amplifier family delivers extremely low phase noise

Custom MMIC has added new category to their rapidly expanding standard product offerings. The company’s new GaAs MMIC Low Phase Noise Amplifier family offers previously unattained phase noise performance. Phase noise is a critical requireme

Custom MMIC | 23-01-2017

Lower power and noise CMOS operational amplifier for automotive applications

The OPAx314-Q1 series from Texas Instruments is a family of single, and dual-, and quad-channel operational amplifiers (op-amps) that represents a new generation of low-power, general-purpose CMOS amplifiers. Rail-to-rail input and output s

Texas Instruments | 20-01-2017

New offline flyback switcher IC family delivers high accuracy and efficiency

Power Integrations has introduced its LinkSwitch-XT2 family of offline, low-power converter ICs offering high accuracy, high efficiency and excellent no-load performance. The ICs target isolated and non-isolated flyback applications in whic

Power Integrations | 20-01-2017

A new IPM with CIB topology drives down costs and speeds up assembly

Vincotech has launched a new, deeply integrated Intelligent Power Module (IPM) for 1200V applications. The flowIPM 1C CIB 1200V achieves, what is claimed to be, the deepest level of integration of any power module available on the market to

Vincotech | 20-01-2017

Articles