The Texas Instruments LM2623-Q1 is a high-efficiency, general-purpose, step-up DC-DC switching regulator for automotive systems. The device accepts an input voltage between 0.9V and 14V and converts it into a regulated output voltage betwee
Texas Instruments | 14-11-2017
RS Components is enabling designers to save board space, bill of materials, and development time with the latest Würth Elektronik MagI3C highly-integrated DC-DC converter modules. By integrating the switching regulator, control circuitr
RS Components | 13-11-2017
The OPAx189 (OPA189 and OPA2189) series of high-precision operational amplifiers, from Texas Instruments, are ultra-low noise, fast-settling, zero-drift devices that provide rail-to-rail output operation and feature a unique MUX-friendly ar
Texas Instruments | 13-11-2017
The DGD2136 introduced by Diodes Incorporated is a fully integrated three-phase gate driver IC intended for driving N-channel MOSFETs or IGBTs in a half-bridge configuration. With its floating high-side drivers, bootstrap operation allows t
Diodes Inc | 13-11-2017
Electropages Podcasts
Intersil has announced the ISL70321SEH and ISL73321SEH quad power supply sequencers designed to drive POL regulators that power high performance FPGAs and complex, multi-rail power systems. Highly scalable, up to four power supplies can be
Intersil | 09-11-2017
The AMC1106 device, from Texas Instruments, is a precision, delta-sigma modulator with the output separated from the input circuitry by a capacitive isolation barrier that is highly resistant to magnetic interference. The input stage of
Texas Instruments | 08-11-2017
Vishay Intertechnology has introduced 13 new 200V and 600V FRED Pt Ultrafast recovery rectifiers in the eSMP series SlimDPAK (TO-252AE) package, each available in automotive grade and commercial/industrial versions. The rectifiers offer low
Vishay | 08-11-2017
The Texas Instruments TSV91x family, which includes single, dual, and quad-channel operational amplifiers (op amps), is specifically designed for general-purpose applications. Featuring rail-to-rail input and output (RRIO) swings, wide band
Texas Instruments | 07-11-2017
Dengrove Electronic Components are helping engineers working with SiC MOSFETs overcome design challenges and increase system reliability with its latest DC-DC converters, which are designed specifically for powering high-slew-rate gate driv
Dengrove | 07-11-2017
CUI’s Power Group has continued the expansion of its portfolio of high density open frame AC/DC power supplies with the introduction of two new series. The VOF-180 and VOF-225A series, outputting 180W and 225W of continuous power respective
CUI | 03-11-2017
Coilcraft's new CST2020 Series current sense transformers sense current up to 40A over a frequency range of 400Hz to 1MHz and offer 4000Vrms isolation voltage between the sense and output windings. They provide reinforced insulation per UL
Coilcraft Europe | 03-11-2017
The Texas Instruments ISOW784x is a family of high-performance, quad-channel reinforced digital isolators with an integrated high-efficiency power converter. The integrated DC-DC converter provides up to 650mW of isolated power at high effi
Texas Instruments | 02-11-2017
Powersolve offers its new PS series of 1000 to 5000VA DC/AC inverters. These are low-cost, pure sine wave output DC/AC inverters available from the company with inputs of either 12V, 24V or 48VDC. Customers can order an AC output of either
Powersolve | 02-11-2017
The TAS5634 is a PWM-input, Class-D amplifier power stage, from Texas Instruments, that supports 2 x 300W (6Ohm) or 1 x 600W (3Ohm) output power with a nominal power supply voltage of 58V. The 58V supply voltage provides support for higher
Texas Instruments | 01-11-2017
Articles
07-05-2025 | Insights | By Robin Mitchell
06-05-2025 | Insights | By Robin Mitchell
02-05-2025 | Insights | By Robin Mitchell