Now available from Farnell element14, are simple, energy-efficient 160W-165W external AC/DC power supply units suitable for a wide range of medical and ITE (commercial) applications. The DTM165-C Series from TDK Lambda are 160W-165W
Farnell element14 | 08-08-2016
RECOM’s new RP10-A and RP10-AW series DC-DC converters target applications where wide input range and accurate regulation are key factors. Typical applications include battery-powered systems, instrumentation, or distributed power archit
Recom International | 08-08-2016
Stocked by Digi-Key, the TDK Corporation has introduced the TDK-Lambda KMS-A series, 15W to 6 W, board-mount, AC/DC, medical- and ITE-certified power supplies. Capable of starting up at -40C, the convection cooled units will operate in ambi
Digikey | 05-08-2016
Texas Instruments’ TPS54335-2A synchronous converter has an input-voltage range of 4.5V to 28V and an integrated low-side switching FET that eliminates the need for an external diode which reduces component count. Efficiency is maxi
Texas Instruments | 05-08-2016
L2Tek has announced availability of a new family of SDI-to-IP emSFP converter modules designed to encapsulate high-performance uncompressed SDI signals into a SMPTE ST-2022-6 stream or decapsulate a ST-2022-6 stream to an uncompressed SDI s
L2Tek | 05-08-2016
PowerPax has extended its LED Driver offering with the addition of a new 20W constant-voltage series. The range features an input voltage range of 200 - 240VAC, 50Hz and an output power rating of 0 - 20W. Outputs are available as either
Powerpax | 05-08-2016
Stocked by Mouser, On Semiconductor NCP1602 6-pin enhanced, light-load efficiency power factor corrected controller optimises PFC boost stage efficiency across a load range. The controller is designed using the innovative Valley synchronise
Mouser Electronics | 05-08-2016
DATEL, Inc. has announced the introduction of the DAC-1412 series, A new line of digital-to-analog converters (DACs) housed in 28-pin plastic TSSOP packages - the 14-bit resolution DAC-1412 Series has been introduced by Datel. The devi
Datel | 05-08-2016
Texas Instruments’ TPS7A87 is a dual, low-noise, LDO voltage regulator capable of sourcing 500mA per channel with only 100mV of maximum dropout. The device provides the flexibility of two independent LDOs and approximately 30% smaller solut
Texas Instruments | 04-08-2016
XP Power has introduced the JWL and JSK series of highly-efficient, typically up to 92%, regulated metal-cased 40/50W DC-DC converters. Offering a variety of input voltage range and single or dual output combinations, both series fit the in
XP | 04-08-2016
Stocked by Mouser, ROHM Semiconductor automotive full CMOS LDO regulators are AEC-Q100 qualified high-performance regulators with 200mA output. The regulators are mounted on a versatile 1.0mm x 1.0mm x 0.60mm SSON004R1010 package. T
Mouser Electronics | 04-08-2016
The TPS7A89 from Texas Instruments is a dual, low-noise (3.8µVRMS), low-dropout (LDO) voltage regulator capable of sourcing 2A per channel with only 400mV of maximum dropout. The device provides the flexibility of two independent LD
Texas Instruments | 03-08-2016
Stocked by Mouser, the Maxim MAX17606 secondary-side synchronous MOSFET driver is designed for the isolated flyback topology operating in discontinuous conduction mode (DCM) or border conduction mode (BCM). By replacing the secondary diode
Mouser Electronics | 03-08-2016
ROHM has two new LDO regulator families, complementing the existing portfolio. With its miniaturised package size, their new BUxxJA2MNVX-C series is claimed to be the world’s smallest automotive-grade LDO regulator whereas the BD7xxLx serie
ROHM Semiconductor | 03-08-2016
26-06-2025 | In The News | By Robin Mitchell
24-06-2025 | Insights | By Robin Mitchell
23-06-2025 | In The News | By Matthew Walker