Power


SIP relay provides up to 4000V input-to-output isolation for high-performance switching

Littelfuse has introduced the CPC1984Y, a 600V, Normally Open Power SIP Relay, rated for up to 1A DC/1Arms continuous load current, twice the load current of the company’s most popular power relay from IXYS Integrated Circuits, now part of

Littelfuse | 14-11-2018

New SiC power module achieves high level of reliability in extreme environments

ROHM has developed a 1700V/250A rated SiC power module that gives what is claimed to be the industry’s highest level of reliability optimised for inverter and converter applications including outdoor power generation systems and industrial

ROHM Semiconductor | 13-11-2018

Compact synchronous buck regulator reduces heat, EMI and footprint

Analog Devices has released the Power by Linear LTC3310S, a 5V, 10A low EMI monolithic synchronous buck converter. The device’s fixed frequency peak current mode architecture is perfect for high step-down ratio applications that require fas

Analog Devices | 12-11-2018

Ultra-low dropout linear regulators for powering modern MCUs and analog sensors

Texas Instruments TPS7A11 Ultra-Low Dropout Linear Regulators can source 500mA with an excellent AC performance (load and line transient responses). This device has an input range of 0.75V to 3.3V, and an output range of 0.5V to 3V with a h

Texas Instruments | 09-11-2018

New silicon carbide FET series provides increased switching speeds and higher efficiency levels

UnitedSiC has launched its UF3C FAST series of 650V and 1200V high-performance silicon carbide FETs in a standard TO-247-3L package. The series provides increased switching speeds and higher efficiency levels than existing UJC3 Series from

UnitedSiC | 08-11-2018

Ultra-compact encapsulated PCB-mount power supplies ideal for standby power circuits

Traco Power has released their TMPS 10 series of 10W fully encapsulated PCB-mount power supplies that measure only 1.5"x 1" x 0.62" and needs no external components. The series provides seven single output models ranging 3.3-48Vout with

Traco Power | 08-11-2018

High drain and extended temperature models for lithium coin cell range

Murata has developed two high drain and extended temperature further ranges of its lithium coin cell batteries. Building on their standard and heat-resistant ranges of ‘CR’ battery sizes, the high current type, assigned suffix ‘R’, has doub

Murata | 06-11-2018

Power shelf offers high-reliability and future flexibility

Bel Power Solutions SPSPFE3-07 Power Shelf, available now from Mouser, provides rectification, system management, and power distribution with high-reliability and flexibility for the future expansion. This power shelf is configured wit

Mouser Electronics | 05-11-2018

Low-noise operational amplifier for wideband transimpedance and voltage amplifier applications

Texas Instruments OPA859 Wideband Low-Noise Operational Amplifier comes with CMOS inputs for wideband transimpedance and voltage amplifier applications. When the device is configured as a TIA, the 0.9GHz GBWP allows high closed-loop bandwid

Texas Instruments | 02-11-2018

Fully approved DIN rail power supplies for railway applications

PULS Power provides reliable, efficient and robust DIN-Rail power supplies for railway applications. Ideal for both trackside and on-board train equipment the railway range of power supplies provides 100% greater mains failure bridging time

Pulse Power & Measurement Ltd. | 02-11-2018

DC-DC boost converter has a broad input voltage range

The Maxim MAX17250 DC-DC boost converter, available now from Mouser, is a high-efficiency, low quiescent current, synchronous boost (step-up) converter with True Shutdown, programmable input current limit, and short-circuit protection. The

Mouser Electronics | 01-11-2018

Line driver amplifier's unique architecture reduces quiescent current

The Texas Instruments THS6301 Line Driver Amplifier is a single-channel, current-feedback architecture, differential line driver that allows G.Fast and different DSL home gateway systems. The device provides 106MHz and 212MHz G.Fast digital

Texas Instruments | 01-11-2018

GaN low noise amplifier gives low noise figure performance

The CMD290 from Custom MMIC is a wideband GaN MMIC distributed low noise amplifier die which runs from 2GHz to 26GHz. The broadband device is perfectly suited for applications needing low noise figure performance and high input power surviv

Custom MMIC | 01-11-2018

PoE PD plus DC-DC controller provides faster response to surge events

Kinetic Technologies AS1113 and AS1114 13W PoE PD plus DC-DC Controllers, available now from Mouser, are single-chip, highly integrated CMOS solutions for PoE. The PoE Controllers combine rectification and protection circuitry, a PD control

Mouser Electronics | 31-10-2018

Articles