Power


Compact DIN rail power supply offers efficiency and low standby power consumption

TDK Corporation has introduced the TDK-Lambda brand DRF960-24-1 DIN rail mount AC/DC power supply, rated at 24V 40A (960W) with a 60A (1,440W) peak for four seconds. The device has a very thin 110mm width, freeing further space for other D

TDK | 08-01-2019

New solar drives converts DC to AC to deliver control of pumps and motors

WEG has released a new optional kit for its class-leading CFW500 series of variable speed drives (VSDs) that promotes pump motor control through photovoltaic (PV) solar cells. The state-of-the-art CFW500 Solar Drive includes a plug-in modul

Weg Electronics | 07-01-2019

Stereo Class-D audio amplifier supports several advanced audio process flows

Texas Instruments TAS5825M Stereo Class-D Audio Amplifier is a stereo high-performance closed-loop Class-D with an integrated audio processor with up to 192kHz architecture. The powerful audio DSP core supports various advanced audio proces

Texas Instruments | 04-01-2019

Wide voltage gain selectable amplifier offers one-chip solution

The Analog Devices LT1997 Wide Voltage Gain Selectable Amplifier is a one-chip solution for accurately amplifying voltages. The device consolidates a precision operational amplifier with highly-matched resistors. Gains from –13 to +14 w

Analog Devices | 03-01-2019

New power IC is capable of delivering up to 75W output power

New Yorker Electronics has updated its line of power ICs with the new Vishay Siliconix SiC462 4.5V to 60V Synchronous microBUCK Regulator. The device is a synchronous buck regulator with integrated high-side and low-side power MOSFETs. The

New Yorker Electronics | 03-01-2019

Four-phase buck converter meets power demands for automotive applications

Texas Instruments LP8756x-Q1 Four-Phase Buck Converter is designed to meet the power management demands of the latest processors and platforms in various automotive power applications. The device contains four step-down DC-DC converter core

Texas Instruments | 27-12-2018

Medical and ITE certified external power supplies meet EU CoC Tier 2 efficiency standards

TDK Corporation has introduced the TDK-Lambda brand DTM250-D external power supplies rated at 250W output power. Certified to both 60601-1 (medical) and 60950-1 (ITE) standards, the series also satisfies the latest EU CoC (Code of Conduct)

TDK | 27-12-2018

Negative voltage drivers optimised for high-performance AlGaAs and HMIC PIN diode switches

MACOM Technology Solutions has launched two new negative voltage drivers intended for use with a wide range of the company's AlGaAs and HMIC PIN diode switches. The new MADR-011020 and MADR-011022 drivers allow integration that complements

MACOM | 27-12-2018

uSLIC power module offers higher voltages for industrial applications

Mouser now offers Maxim Integrated's MAXM17552 compact step-down DC-DC power module. Providing an ultra-small power source to drive high-voltage consumer and industrial applications, the micro system-level IC (uSLIC) module produces a broad

Mouser Electronics | 19-12-2018

Bidirectional level shifter offers wide voltage range and flexible output options

Diodes Incorporated has released the PI4ULS5V108, an eight-channel, high speed, bidirectional level shifter created for inter-IC communications between devices operating on different voltage supply rails. Typical applications cover networki

Diodes Inc | 19-12-2018

Voltage supervisors for use in microprocessor and microcomputer systems

The TL7700 Voltage Supervisors from Texas Instruments are a bipolar integrated circuit designed for using as a reset controller in microprocessor and microcomputer systems. The SENSE voltage can be set to any value higher than 0.5V using tw

Texas Instruments | 18-12-2018

New high-frequency wire wound transformers deliver high reliability

Pulse Electronics’ has introduced its new series of PA4470.XXXNL High Frequency Wire Wound Transformers. Created to deliver high reliability and performance, the device is a low-power transformer for usage in a discontinuous mode flyback c

Pulse | 18-12-2018

New smart home platform drives battery-powered IoT device trend

Silicon Labs launches the next-generation Z-Wave 700 on the Wireless Gecko platform, the industry’s most comprehensive hardware and software connectivity solution for the IoT. Z-Wave 700 delivers on the company's vision and platform integra

Silicon Labs | 17-12-2018

New signal transformers for battery monitoring applications meet automotive standard

RS Components has availability of a pair of BMS signal transformers from Bourns. The new SM91501AL and SM91502AL are dual and single-channel isolation transformer modules, respectively, with both devices providing common-mode chokes

RS Components | 14-12-2018

Articles