The Texas Instruments UCC28951 device is an enhanced version of the UCC28950. It is a fully compatible drop-in replacement for the device. The device uses advanced control of the full-bridge as well as active control of the synchronous rect
Texas Instruments | 17-09-2018
Bel Power Solutions has released the TSR10, a robust, high power 10kW, DC programmable laboratory power supply. The device is a 3U, 19” rack mounted precision power supply which delivers clean and stable DC power, with operation enabled on
Bel Power | 17-09-2018
Traco Power has released their TPP 15A-D and TPP 30A-D series of medical and industrial approved 15W and 30W PCB-mount, open-frame power supplies measuring only 1.5" x 1" x 0.8” (15W) or 2.74" x 1.36" x 0.95” (30W) highlighting an extended
Traco Power | 17-09-2018
The TAS3251 from Texas Instruments is a digital-input, high-performance Class-D audio amplifier that allows true premium sound quality with Class-D efficiency. The digital front-end highlights a high-performance Burr-Brown DAC with integrat
Texas Instruments | 14-09-2018
Electropages Podcasts
The new Power by Linear LTM46xx µModule power products from Analog Devices, is a series of POL regulators developed to decrease solution size and produce reliable power circuit performance. The regulators support step-down (buck), step-up (
Analog Devices | 14-09-2018
The Texas Instruments TAS2770 is a mono, digital input Class-D audio amplifier optimised for efficiently driving high peak power into small loudspeakers. The amplifier can deliver 15.4W of peak power into a 4Ohm load while sustaining 11.6W
Texas Instruments | 13-09-2018
Toshiba Electronics Europe launched a new dual H-bridge driver IC for DC brushed motors and stepping motors. The TC78H651FNG provides performance at a low voltage (down to 1.8V) and high current (up to 1.6A) that is crucial for equipment po
Toshiba | 13-09-2018
Analog Devices ADuM5020 and ADuM5028 isoPower DC-DC converters are low-emission, isolated DC-DC Converters based on iCoupler technology. The converters offer regulated, isolated power that is below CISPR22 Class B limits at full load on a t
Analog Devices | 12-09-2018
The LMG1020 gallium nitride (GaN) driver from Texas Instruments is now available from Mouser. The single, low-side driver allows efficient, high-performance designs in speed-critical applications such as time-of-flight laser drivers, facial
Mouser Electronics | 11-09-2018
RECOM has increased its low power AC/DC portfolio with encapsulated 5W power supplies, which work up to +90C. They can take input voltage lines of up to 305VAC and give peak power capability up to 6W. These modules are fit for Industry 4.0,
Recom International | 11-09-2018
XP Power has launched a cost-effective AKM36/AKM45/AKM65 series of desktop AC/DC power supplies rated at 36W, 45W and 65W. Targeted at the healthcare, ITE and industrial markets, all versions satisfy the latest US DoE Level VI and EU CoC Ti
XP | 10-09-2018
The Analog Devices LT8361 Low IQ Boost/SEPIC/Inverting Converters are current-mode, 2MHz multi-topology DC-DC converters with a 2A, 100V power switch. Creators can configure the devices as either a boost, SEPIC, or an inverting converter. T
Analog Devices | 07-09-2018
The TLV6001-Q1 single operational amplifier, from Texas Instruments, is for general-purpose automotive applications. This device has a broad voltage range, from rail to rail, on input and output and a low quiescent current of 75µA, typical.
Texas Instruments | 06-09-2018
ABB's Type 2 SPDs are intended to discharge the currents generated by indirect lightning strikes causing induced or conducted overvoltages on the power distribution network. They are available now from RS Components. The devices are cha
RS Components | 06-09-2018
Articles
12-05-2025 | Insights | By Robin Mitchell
12-05-2025 | Insights | By Mathew Ekholm
07-05-2025 | Insights | By Robin Mitchell