Automotive & Transport


Circular heavy-duty connectors designed for high-power EV powertrain applications

TTI Europe now stocks circular heavy-duty (CHD) connectors from Amphenol Industrial. The robust, high-performance CHD14 series is created for usage in demanding commercial and off-road vehicle applications such as EV battery packs, inverter

TTI Europe | 15-12-2023

Space-saving floating BTB connector series has the world’s smallest width

Hirose has extended its DF40 BTB floating connector series to support PCI-ex Gen.4 (16Gbps) and MIPI D-PHY Ver.1.1 (1.5Gbps). The DF40F Series offers high-density mounting, great space-savings, and high-temperature resistance to 125C for au

Hirose | 13-12-2023

Proven safety inserted into smart shunt solutions

Melexis releases the new MLX91231, increasing its automotive current sensor range by adding a shunt-based sensing solution. This IVT (current, voltage, and temperature) device meets functional safety requirements and combines high accuracy

Melexis | 13-12-2023

High current shunts capable of high-temperature operation

As power electronics evolve, the need for high current, low resistance sensing resistors continues growing. For industrial power control and automotive engine controls, high-temperature operation is needed. Due to their technology, many sur

Stackpole | 13-12-2023

Thermal gels prove reliable in vertical and high-vibration applications

The Chomerics Division of Parker Hannifin Corporation has released two high-performance, high-reliability, fully cured dispensable thermal gels. The new THERM-A-GAP GEL 35VT and THERM-A-GAP GEL 50VT conduct heat away from electronics to hea

Parker Chomerics | 08-12-2023

High-speed camera production system has lens assembly and alignment in one

CMAT-S is an all-in-one system for assembling and dynamically aligning lenses in ADAS cameras. With this machine, ASMPT AEi presents a powerful implementation of its patented Continuous Sweep Alignment process, greatly improving the system'

ASMPT | 08-12-2023

Photovoltaic output photocoupler for automotive launched

Toshiba Electronics Europe GmbH offers a new photovoltaic output photocoupler with an enhanced open-circuit voltage. The new device is mainly intended for use within SSR applications in automotive. However, it can also be employed in indust

Toshiba Electronics | 07-12-2023

First SiC MOSFETs raise the bar for robust and reliable power switching

Nexperia offers its first SiC MOSFETs by releasing two 1200V discrete devices in three-pin TO-247 packaging with RDS(on) values of 40mOhm and 80mOhm. NSF040120L3A0 and NSF080120L3A0 are the first in a series of planned releases which will s

Nexperia | 06-12-2023

Experience complete in-cabin monitoring solution

Melexis and emotion3D are launching a revolutionary automotive in-cabin monitoring solution based on 3D ToF technology. It overcomes the limitations of established driver monitoring systems (DMS). For the first time, experience the strength

Melexis | 06-12-2023

Industry-first standard rectifier and TVS two-in-one solution

New Yorker Electronics now offers Vishay’s new R3T2FPHM3, the industry’s first standard rectifier and TVS two-in-one device. The new space-saving hybrid solution for automotive applications provides an oxide planar chip junction design and

New Yorker Electronics | 05-12-2023

Three-phase transformers for industrial and medical applications

Bel Fuse Inc. has announced that its Signal Transformer division released the expansion to their 3PH Series of Three Phase Dry Type Transformers aimed at medical, industrial, lighting, EV charging and green energy applications. Adaptable

Bel Fuse | 05-12-2023

New ASIL C ready stray-field robust 3D sensors for automotive and industrial applications

TDK Corporation has extended its Micronas 3D HAL position sensor family with new HAL 3930-4100 and HAR 3930-4100 for automotive and industrial applications. The sensors empower precise position detection with robust stray-field compensation

TDK | 04-12-2023

New high power laser diode for LiDAR

ROHM has created a high-power laser diode – the RLD90QZW8. It is excellent for industrial equipment and consumer applications needing distance measurement and spatial recognition. The device is a 120W infrared high-output laser diode dev

ROHM Semiconductor | 01-12-2023

New foil resistor series designed for 5G and EV charging equipment

New Yorker Electronics has revealed the new release of VPG Foil Resistors’ RWX Wraparound Foil Resistors. These high-precision, stable Bulk Metal Foil resistors are AEC-Q200 qualified, have resistance tolerances up to ±0.01% and are obtaina

New Yorker Electronics | 01-12-2023

Articles