Power


High voltage DC switching relays ideal for high voltage load control systems

The Fujitsu FTR-E1 Series High Voltage DC Switching Relays, available from Mouser, feature 450VDC with 20/30A high voltage DC load switching and non-polarized contacts. The series has low coil power consumption and offers high insulation.

Mouser Electronics | 05-07-2018

Expanded power modules range feature MOSFETs and standard diodes

Vishay Intertechnology has extended its portfolio of power modules in the SOT-227 package with seven new devices offering ThunderFET power MOSFETs and standard, FRED Pt, and Trench MOS Barrier Schottky (TMBS) diodes. The modules are offered

Vishay | 05-07-2018

New SIP 8 regulated DC-DC converter ideal for industrial applications

One of the latest products from Ideal Power is the new 43LDL03 series; a seamless solution to powering robotics, industrial automation and control systems, and produced by P-Duke. This series operates at up to 3W power and comes in an u

Ideal Power | 04-07-2018

Isolated DC-DC converter offers low cost, high performance and efficiency

The Traco TEC 3WI, available from RS Components, is a new series with the objective to enhance the prevalent 3W SIP-8 DC-DC converters regarding cost, performance and efficiency. The latest technology and components accomplish a high ef

RS Components | 03-07-2018

Inductor-free stereo analog input class-D audio amplifier

The Texas Instruments TPA3138D2 is a 10W/ch, high-efficiency, low-idle-current Class-D stereo audio amplifier. It can drive stereo speakers with a load as low as 3.2Ohm. In the 1SPW mode, it consumes a low idle current of only 21mA (12V) an

Texas Instruments | 03-07-2018

Sealed lead-acid batteries ideal for UPS and emergency backup

Sealed with special compound epoxy and using pressure controlled vent valves the RS Components RS Pro Sealed Lead-Acid Batteries. Perfect for uninterruptible power supply and emergency backup, these gel-constructed batteries can be stored f

RS Components | 02-07-2018

Power supplies offer full MoPPs isolation and low acoustical noise

TDK Corporation has introduced the TDK-Lambda brand QS series of single output medical and industrial AC/DC power supplies. Rated at 600W to 1200W output power, these high-efficiency products use low-speed fan cooling with significantly red

TDK | 28-06-2018

Programmable preamplifiers include integrated ADC drivers

THAT Corporation 6261, 6263 and 6266 Programmable Preamplifiers are available now from Mouser. These devices are digitally controlled, two-channel preamps with integrated ADC drivers. The gain for the preamplifiers is programmable from -8dB

Mouser Electronics | 28-06-2018

Compact board-mount power supplies suit IoT, household and industrial applications

XP Power is offering low-cost VCE03 and VCE10, 3W and 10W series of board-mounted AC/DC power supplies with an extended universal input range from 85VAC to 305VAC, covering all nominal AC inputs from 100VAC to 277VAC in a single ultra-compa

XP | 28-06-2018

V click board ideal for use in multiple voltage applications

Available now from Mouser, the MikroElektronika MIKROE-2890 Hz to V click board converts signal input frequency with virtually any wave shape to a DC voltage output, with a level proportional to the input frequency. The device has a linear

Mouser Electronics | 27-06-2018

Protector device provides overvoltage and IEC ESD protection

The Texas Instruments TPD6S300A is a single-chip USB Type-C port protection device that gives 20V Short-to-VBUS overvoltage and IEC ESD protection. Many products and accessories for USB Type-C do not meet the USB Type-C specification. A

Texas Instruments | 27-06-2018

DIN rail power supplies offer simplicity without compromise

PULS Power PIANO PIC series is intended for applications that need reliable DIN rail power supplies created to provide the most widely specified features and performance demanded by customers. The series are single-phase input power supplie

Pulse Power & Measurement Ltd. | 27-06-2018

Powersolve – New programmable power supplies are versatile, efficient and scalable

Powersolve has a new 3000W programmable power supply series that can be 2U or 3U rack-mounted or wall-mounted to offer a versatile solution where high precision and efficiency are essential requirements. Series and parallel operation up to

Powersolve | 27-06-2018

Three-phase smart gate driver has three current shunt amplifiers

The Texas Instruments DRV8304 device is an integrated gate driver for three-phase brushless DC (BLDC) motors applications for 12V and 24V DC rails. These applications include FOC, sinusoidal current control, and trapezoidal current control

Texas Instruments | 26-06-2018

Articles