Power


New regulated high-voltage DC-DC converters for multiple applications

XP Power has launched the HRC05 series of 5W regulated high-voltage DC-DC converters that offer a fully adjustable and reliable output voltage up to 6kVDC in a small package. Models in the series give design engineers working on high voltag

XP | 11-05-2021

New EMC filter for regenerative applications

Schaffner has introduced the new FN3840 for use in AIC or AFE applications, where energy is fed back to the power grid. This process diminishes energy costs in bigger factories or can decrease losses and excess heat in converters. This s

Schaffner EMV AG | 10-05-2021

Filterless Class-D amplifier for small portable devices

NJR (New Japan Radio) NJU8759A Filterless Class-D Amplifier, available now from Mouser, is an analog signal input monaural amplifier that operates from a single power supply of 1.8V and 1μA maximum standby current. The device is ideal for s

Mouser Electronics | 06-05-2021

New Trench Schottky rectifiers offer increase efficiency for fast switching applications

Nexperia has increased its portfolio of Trench Schottky rectifiers with devices rated at up to 100V and 20A. The new parts offer superior switching behaviour and thermal performance. They are offered in its CFP packages which provide a much

Nexperia | 06-05-2021

Two power supplies extend series output options to 2000W

Telonic Instruments now offers the latest 2kW models from Kikusui’s PWR-01 range of benchtop power supplies. Two models have been added to the series, which are available now. The 0-40V, 0-200A PWR2001L and 0-80V, 0-100A PWR2001ML are th

Telonic Instruments | 05-05-2021

Digital PoL regulator in compact SIP for telecom and datacom applications

Flex Power Modules has launched the BMR474, a high-power density, digital non-isolated PoL regulator. Due to its vertically mounted SIP (single inline package) design, the device saves precious board space, while being able to provide up to

Flex Power Module | 05-05-2021

Switching regulator family offers optimum thermal management

Recom‘s RPMH-1.5 series is a 1.5A non-isolated switching regulator power module, offers a profile of only 3.75mm and operates in a temperature range of -40C to +100C without derating. Switching regulators are ideal for applications where th

Recom International | 05-05-2021

SiC intelligent power modules platform expanded for e-mobility

CISSOID adds to its growing platform of three-phase SiC MOSFET Intelligent Power Module products by releasing new liquid-cooled modules for E-mobility tailored for lower switching losses or higher power. The company is also releasing a modu

Cissoid | 30-04-2021

High accuracy op-amp ideal for multiple applications

STMicroelectronics TSU112IY Nanopower High Accuracy Operational Amplifier, available now from Mouser, offers an ultra-low-power consumption per channel of 920nA typical and 1.3µA maximum when supplied by 3.3V. Combined with a supply voltage

Mouser Electronics | 29-04-2021

Industry-first smaller profile circuit protection TVS components

ProTek Devices has launched a series of high-powered surface mount TVS components for circuit protection from the electromagnetic field, lightning, and other electrical fast transients in high power applications. These new devices are ideal

Protek | 29-04-2021

Power GaN solution reduces component count and minimises system costs

Nexperia has announced volume availability of its second-generation 650V power GaN FET device family, providing notable performance advantages over earlier technologies and competitive devices. With RDS(on) performance down to 35mOhm (typic

Nexperia | 29-04-2021

LCD energy meter ideal for an extensive range of power monitoring applications

The panel-mounted Trumeter APM 3 Phase LCD Energy Meter, available now from RS Components, is intended for usage on mains circuits, potential transformers and current transformers. Its multi-measurement capability of active and reactive pow

RS Components | 28-04-2021

New power supply brings linear accuracy to the basic power supply class

Rohde & Schwarz has continued to expand its range of basic power supplies with the new R&S NGA100 series. The device is offered in four models, giving a choice of single and dual outputs with up to 35V/6A per output or 100V/2A per o

Rohde & Schwarz | 26-04-2021

AC/DC power supplies with voltage and current programming

XP Power has introduced the HDL3000-HV series of single-phase input 3kW AC/DC power supplies with output voltages from 150V to 400VDC, with up to 800VDC achieved by connecting units in series. All models provide output voltage and current a

XP | 26-04-2021

Articles