Power


AC micro-drives have outstanding performance and flexibility

A new series of AC Micro-drive, introduced by Yaskawa, has been developed for the broadest range of industrial applications which consolidate valuable functions and features to offer important benefits through the whole life-cycle of a mach

Yaskawa | 25-04-2019

AEC-qualified TVS array series for automotive sub-systems circuit protection

ProTek Devices offers a new series of AEC-Q101 qualified TVS arrays for circuit protection in consumer electronics, automotive, aerospace, intelligent control systems and telecommunications applications. The new PAM37SDxxAL/CAL series is of

Protek | 25-04-2019

Low profile PSU carries full medical safety and EMC approvals

FiDUS Power has introduced what is claimed to be the lowest profile 180W power supply of its class, measuring just 0.75" high, 25% less than its nearest rival. Offered in standard UL/IEC/EN 60950-1 safety-approved and medically-approved

FiDUS | 25-04-2019

Synchronous step-down converters for space-constrained applications

Analog Devices LTC3315A Synchronous Step-Down Converters highlight dual 2A monolithic synchronous step-down converters working from a 2.25V to 5.5V input supply in one package. This makes the device excellent for space-constrained applicati

Analog Devices | 24-04-2019

Synchronous rectifier controller enhances overall system efficiency

Texas Instruments UCC24624 SR Controller is dedicated for LLC resonant converters to substitute the lossy diode output rectifiers with SR MOSFETs and enhance the overall system efficiency. The SR controller employs a drain-to-source voltage

Texas Instruments | 24-04-2019

Radiation-tolerant PWM controller and GaN FET driver for new space smallsats

Renesas Electronics Corporation has released what is claimed to be the space industry’s first plastic-packaged, radiation-tolerant PWM controller and GaN FET driver for DC-DC power supplies in smallsats and launch vehicles. The ISL71043M si

Renesas | 24-04-2019

ReDriver boosts signal quality of high-speed PCIe 4.0 interfaces

Diodes Incorporated has introduced a ReDriver for the server, storage, and networking market fields. The PI3EQX16904GL is a PCIe 4.0 compliant, 2.5Gbps to 16Gbps, four-differential channel, linear ReDriver. The device offers programmable li

Diodes Inc | 24-04-2019

Synchronous boost converter is a fully-integrated converter with load disconnect built-in

Texas Instruments TPS61372 Synchronous Boost Converter is a fully-integrated converter including built-in load disconnect. The device maintains output voltage up to 16V with a 3.8A current limit. The input voltage varies from 2.5V to 5.5V s

Texas Instruments | 23-04-2019

Bidirectional surge protection device protects systems from high-power transients

Texas Instruments TVS1801 18V Bidirectional Surge Protection Device shunts up to 30A of IEC 61000-4-5 fault current to defend systems from lightning strikes or high-power transients. The device withstands the common industrial signal line E

Texas Instruments | 18-04-2019

Four-channel transimpedance amplifier maximises effectiveness of LiDAR systems

Analog Devices LTC6561 four-channel Transimpedance Amplifier (TIA) gives a 220MHz -3dB bandwidth with 2pF input capacitance. The device's high transimpedance, low noise, and low power dissipation are excellent for LiDAR receivers employing

Analog Devices | 17-04-2019

Space-saving power supplies for the low-performance range

The Siemens one-phase SITOP PSU6200 mini is slim and space-saving power supplies for the low-performance range. They are employed in distributed applications in control boxes or small control cabinets. The device is a 24V/2.5A with stabilis

RS Components | 17-04-2019

DC-DC converter for critical medical applications

RECOM has added to its medical portfolio with the REM2 series which provides versatile features and complete medical certifications. These modular DC-DC converters offer engineers more freedom to develop their PCB layout, understanding that

Recom International | 17-04-2019

Two-day sample service delivers modular power solutions

FiDUS Power is now able to deliver samples of modular power products from its facility based in Aldermaston in only two days. Using industrial and medically approved configurable power supplies, the company can create a large number of conf

FiDUS | 17-04-2019

Fanless power supplies for protection of medical and industrial equipment

MEAN WELL UMP-400 400W Fanless Power Supplies, available now from Mouser, use a fanless, low-profile design to protect medical and industrial equipment from short circuits, overvoltage, overload, and over temperature. These power supplies o

Mouser Electronics | 16-04-2019

Articles