Latest News


Heatsinks ideal for high power density and small size electronic packaging

Ohmite? CR Series Heatsinks use a patented cam clip system to allow assembly without mounting holes, fasteners, tools, and fixtures. Fewer components means less interference, both physically and electrostatically, over the lifetime of the h

Mouser Electronics | Connectors, Switches & EMECH | 16-10-2017

Low-voltage comparators ideal for space critical designs

The TLV7011 and TLV7021, from Texas Instruments, are single-channel, micro-power comparators that feature low-voltage operation with rail-to-rail input capability. These comparators are available in an ultra-small, leadless package measurin

Texas Instruments | Products | 16-10-2017

Android thermal imaging camera with ability to see beyond the naked eye

The FLIR ONE Pro, available from RS Components, is an attachment that connects to the bottom of mobile devices via lightning connector. With the ability to see what the naked eye cannot. The device provides thermal images of minute temperat

RS Components | Products | 16-10-2017

New sensor enables 3D detection of distances with wide angle of view

Panasonic Industry Europe has developed a 3D LiDAR (Light Detection and Ranging) Sensor equipment that measures distance between the equipment and the object from the round-trip travelling time of the pulse laser that is projected to the ob

Panasonic | Products | 16-10-2017

New varistors offer reliable ESD protection in capacitance-sensitive applications

AVX Corporation has released the new Antenna PowerGuard Series varistors, an ultralow capacitance extension of its reliable AntennaGuard range with new voltage, capacitance, and energy ratings. These varistors exhibit high current and energ

AVX | Products | 16-10-2017

Connectors simplify system assembly and reduce manufacturing time

Cliff Electronics offers system integrators 1U, 19” rack panels pre-assembled with up to 16 of their FT connectors to simplify system assembly, reduce manufacturing time, component count and cost. The panels have 16mm x 24mm holes to ac

Cliff Electronics | Products | 16-10-2017

DC-DC converter module save space, energy and time at the test house

Now available from Dengrove Electronic Components ideal for saving space in medical-device designs, the RECOM REM1 series, is a 1W DC-DC converter family certified to medical IEC/EN/ANSI/AAMI 60601-1 and general IEC 62368-1 equipment safety

Dengrove | Products | 16-10-2017

µModule regulator in tiny package is ideal for noise-sensitive signal processing applications

Linear Technology Corporation’s LTM8063, is a 40VIN, 2A µModule step-down regulator in a tiny 6.25mm x 4mm BGA package. The package size is 75% smaller than the existing equivalent product. With two 0805 size capacitors and two 0603 size re

Linear Technology | Products | 16-10-2017

Global distribution agreement now offers Arduino-compatible boards

Mouser has signed a global distribution agreement with LinkSprite. The company’s product line features a series of boards and accessories, including the O-board, the Arduino-compatible LinkNode D1 board, and LinkNode modules and kits. The O

Mouser Electronics | Products | 13-10-2017

Ultra-low leakage load switch supports very low operating voltages

The Texas Instruments TPS22916xx is a small, single channel load switch using a low leakage P-Channel MOSFET for minimum power loss. Advanced gate control design supports operating voltages as low as 1V with minimal increase in ON-Resistanc

Texas Instruments | Products | 13-10-2017

Connectors specifically designed for outdoor, waterproof applications

The T series connectors from Lemo are now available from RS Components. They have been specifically designed for outdoor applications. They include an inner sleeve and seals to prevent penetration of solids or liquids. The series is waterti

RS Components | Products | 13-10-2017

New sensorless sinusoidal three-phase gate controller offers flexible, low audible noise and vibration solution

Allegro MicroSystems Europe has released a three-phase, sensorless, brushless DC (BLDC) motor controller for use with external N-channel power MOSFETs. The company’s A4964 is specifically designed for the automotive market with target appl

Allegro | Products | 13-10-2017

Anritsu – Partnership provides solutions to create comprehensive PCI Express 4.0 test system

Anritsu and Teledyne LeCroy has announced a partnership to provide a capable PCI Express 4.0 test solution, integrating the Anritsu Signal Quality Analyzer (SQA) MP1900A BERT with the LabMaster 10Zi-A oscilloscope and QPHY-PCIe4-Tx-Rx softw

Anritsu | Products | 13-10-2017

Clip fix enclosure locking program can help save time and money

EMKA’s 1500 clip fix quarter-turn locking program is specifically designed for time saving in pressured assembly areas – to ensure high levels of enclosure sealing and presentation with minimum effort. IP65 sealing performance is offered wi

Emka | Products | 13-10-2017