Automotive & Transport


Powerful and compact SMD fuse for high current SELV applications

Schurter has launched its new UHS, a compact fast acting SMT fuse developed to interrupt high-energy overcurrent in the SELV range safely. The new UHS is offered in six current ratings from 50-100A at 50VDC or 32VDC, with a breaking capacit

Schurter | 21-04-2023

Next-gen embedded motor controller family for SoC BDC and BLDC

TDK Corporation expands its Micronas embedded motor controller portfolio with the first members of the new HVC 5x family of programmable SoC motor controllers for driving small stepper, BDC and BLDC motors in automotive and industrial appli

TDK | 21-04-2023

New LED drivers for LCD backlights contribute to lower power consumption

ROHM has developed the 4ch/6ch LED driver ICs, BD83A04EFV-M, BD83A14EFV-M, and BD82A26MUF-M, created for medium to large-size displays in-car infotainment and instrument clusters. Conventional LED drivers use large amounts of power and a

ROHM Semiconductor | 20-04-2023

High-performance IMU for autonomous vehicles robots and ADAS

ACEINNA's new IMU330RA is a straightforward-to-integrate, high-performance 6-DOF inertial sensor packed in a ruggedised, sealed, over-moulded plastic housing at IP69K level. It provides a redundant three-Axis Accelerometer and three-Axis Ra

ACEINNA | 20-04-2023

Automotive modules expand multichannel high data rate communication

Mouser is now shipping the u-blox JODY-W3 Host-Based Automotive Modules. The modules are created to satisfy the growing number of wireless high-speed, high-data communication connections for automobiles and industrial IoT applications, such

Mouser Electronics | 19-04-2023

Strengthened ecosystem for advanced auto and consumer and IoT applications

Cadence Design Systems, Inc has welcomed Kudan and Visionary.ai to the Tensilica software partner ecosystem, acquiring industry-leading SLAM and AI ISP solutions to Cadence Tensilica Vision DSPs and AI platforms. The wide Tensilica Vision a

Cadence | 19-04-2023

Board-mount DC-DCs for harsh environment railway applications

A new range of RECOM DC-DCs for railway applications set a standard for power density and cost-effectiveness with 40W output in an industry-standard 2“ x 1” x 0.4” (50.8mm x 25.4mm x 10.2mm) board-mount through-pin package. The regulated an

RECOM Power | 19-04-2023

Subminiature switches deliver the smallest available solution

Omron Electronic Components Europe has increased its sealed basic switch portfolio, with devices providing the smallest comparable solution in the industry and supplying multi-angle operation in an IP67-rated sliding-contact package. The

Omron | 19-04-2023

Cable-assembly product line offers multiple configurations

Molex offers an extended cable-assembly product line with additional innovative solutions from I-PEX. The organisations provide I-PEX MHF 4L LK and MHF I LK cable assemblies, which are obtainable in multiple configurations utilising standar

Molex | 19-04-2023

Reference development platform for i.MX 93 applications processor launched

eInfochips has launched a Reference Development Platform based on NXP Semiconductors’ i.MX 93 applications processors. “As an early access partner for the NXP i.MX 93 platform, eInfochips is proud to offer our clients a cutting-edge refe

eInfochips | 19-04-2023

Auto LED and OLED driver effectively drives pixel-controlled lighting applications

With the growing demand for animation in automotive lighting, LEDs must be controlled independently. Thus, LED drivers with digital interfaces are crucial to drive pixel-controlled lighting applications effectively. In exterior lighting, mu

Texas Instruments | 18-04-2023

EMC solution for residential EV-charging stations

E-mobility is a fast-growing market, and regulatory compliance is crucial for charging stations. The development of the new RV Series choke from Schaffner is supported by the company’s decades of expertise as a global leader in electromagne

Schaffner Holding AG | 18-04-2023

Isolated DC-DC converters provide a smaller mounting area in isolation circuit

ROHM has developed an isolated flyback DC-DC converter, BD7Fx05EFJ-C (BD7F105EFJ-C, BD7F205EFJ-C), optimised for gate drive power supplies in xEV applications, including electric compressors and PTC heaters. xEVs, including HEV and EVs,

ROHM Semiconductor | 17-04-2023

New range of EMC high-current filters with exceptional attenuation characteristics

TDK Corporation has introduced its B84143C*S250/S251 series the new EPCOS three-line EMC filters for converter applications with high currents. Depending on the type, they are intended for rated voltages of 305/530VAC and 440/760VAC (50/60H

TDK | 14-04-2023