Texas Instruments


Synchronous buck LED driver for headlights and adaptive LED modules

The TPS92520-Q1 Synchronous Buck LED Driver is a monolithic dual synchronous buck LED driver from Texas Instruments. The device provides a wide 4.5V to 65V operating input voltage

Automotive & Transport | 23-07-2020

Wideband RF synthesiser attains low in-band noise and integrated jitter

The Texas Instruments LMX2820 is a high-performance, wideband synthesiser that can generate any frequency in the range of 43.75MHz to 22.4GHz. The high-performance PLL with a figur

Semiconductors | 22-07-2020

Simple to use ADC has an internal oscillator for conversion processes

Texas Instruments ADS7138 12-Bit ADC is an easy-to-use, eight-channel, multiplexed, 12-bit, successive approximation register SAR ADC. The eight channels are able to be configured

Semiconductors | 21-07-2020

Demonstrating small PCB with evaluation module

Texas Instruments TPS548A29EVM-023 EVM is intended to demonstrate the small printed circuit board that may be accomplished when designing with the TPS548A29 device. The device is a

Design & Manufacture | 20-07-2020

Analog-to-digital converter is an easy-to-use SAR ADC

Texas Instruments ADS7028 12-Bit Analog-to-Digital Converter is an easy-to-use, eight-channel, multiplexed, 12-bit, 1MSPS, successive approximation register analog-to-digital conve

Semiconductors | 17-07-2020

Precision comparator provides low-power and high-accuracy

Texas Instruments TLV4011 Precision Comparator is a high-accuracy and low-power comparator with a precision integrated reference. Two external resistors are able to be connected to

Semiconductors | 16-07-2020

SPDT general purpose switch for wide range of applications

Texas Instruments TMUX1237 SPDT General Purpose Switch is a general-purpose 2:1, SPDT, switch that supports a wide operating range of 1.08V to 5.5V. The device supports bidirection

Connectors, Switches & EMECH | 15-07-2020

EVM employs a four-device cascaded array of mmWave devices

Texas Instruments MMWCAS-RF-EVM AWRx Cascaded Radar RF EVM employs a four-device, cascaded array of AWRx mmWave devices. This configuration enables a single master device to distri

Test & Measurement | 14-07-2020

Evaluation module for a cascaded imaging radar system

Texas Instruments MMWCAS-DSP-EVM Evaluation Module utilises the TDA2x high performance, multimedia application processor based on enhanced OMAP architecture implemented with 28nm t

Design & Manufacture | 13-07-2020

Zero-drift Hall-effect current sensors achieve consistent and accurate measurements

Texas Instruments has launched the industry’s first zero-drift Hall-effect current sensors. The TMCS1100 and TMCS1101 allow the lowest drift and highest accuracy over time and temp

Test & Measurement | 10-07-2020

Dual comparator with integrated reference

The Texas Instruments TLV4062 and TLV4082 are a family of high-accuracy, dual-channel comparators providing low power and small solution size. The IN1 and IN2 inputs comprise hyste

Semiconductors | 09-07-2020

Isolated dual-channel gate drivers offer high efficiency and robustness

Texas Instruments UCC21320-Q1 Isolated Dual-Channel Gate Drivers are supplied with 4A source and 6A sink peak current. They are created to drive power MOSFETs, IGBTs, and SiC MOSFE

Power | 08-07-2020

Low offset voltage low noise op-amps offer exceptional DC precision

Texas Instruments TLV915x Low Offset Voltage Low Noise Op-Amps are 16V general-purpose operational amplifiers. These devices provide exceptional DC precision and AC performance, in

Power | 07-07-2020

Bus transceiver uses two individually configurable power-supply rails

Texas Instruments SN74AXCH2T45 Dual-Supply Bus Transceiver is a two-bit non-inverting bus transceiver that accepts two individually configurable power-supply rails. The device is o

Power | 06-07-2020