Texas Instruments


Automotive fault protected CAN transceiver with flexible data-rate

This Texas Instruments’ CAN transceiver family meets the ISO11898-2 (2016) high speed CAN physical layer standard. All devices are designed for use in CAN FD networks up to 2Mbps.

Power | 28-04-2016

Integrated high-voltage GaN FET and driver solution enables twice the power density and half the power loss

Texas Instruments announced the availability of 600V gallium nitride (GaN) 70mohm field-effect transistor (FET) power-stage engineering samples. They say they are the first and on

Products | 27-04-2016

Automotive bus controlled 16-channel LED sink driver

The TLC59116-Q1, from Texas Instruments, is an I2C-Bus controlled 16-channel LED driver that is optimized for red/green/blue/amber (RGBA) colour mixing and backlight application. E

Products | 26-04-2016

Buck converter achieves the high power density and small footprint

Texas Instruments’ TPS54202 is a 4.5V to 28V input voltage range, 2A synchronous buck converter. The device includes two integrated switching FETs, internal loop compensation and 5

Products | 25-04-2016

Resolver-to-digital Interface with power supply and amp

The PGA411-Q1 device, from Texas Instruments, is a resolver to digital converter, with an integrated exciter-amplifier and boost-regulator power supply. It is capable of both excit

Products | 22-04-2016

Fixed-point digital signal processor product family designed for low-power applications

These devices are members of Texas Instruments’ C5000 fixed-point digital signal processor (DSP) product family and are designed for low-power applications. The fixed-point DSP

Products | 21-04-2016

MOSFET designed to minimize footprint in handheld and mobile applications

This –12V, 97mO, P-Channel FemtoFET MOSFET from Texas Instruments is designed and optimized to minimize the footprint in many handheld and mobile applications. This technology is c

Distributors | 20-04-2016

New generation of e-trim operational amplifiers

This post is sponsored by Texas Instruments. The Texas Instruments’ OPAx191 family (OPA191, OPA2191, OPA4191) is a new generation of 36V, e-trim operational amplifiers. These

Products | 19-04-2016

Low-power, voltage-output, dual-channel digital-to-analog converters

This post is sponsored by Texas Instruments. From Texas Instruments the DAC756x, DAC816x, and DAC856x devices are low-power, voltage-output, dual-channel, 16-, 14-, and 12-bit d

Products | 18-04-2016

Differentially Compensated and Highly Accurate Inductive Switch

The Texas Instruments LDC0851 is a close range inductive switch ideal for contactless and robust applications such as presence detection, event counting, and simple buttons. The

Products | 15-04-2016

Wideband Frequency Synthesizer with Integrated VCO

This post is sponsored by Texas Instruments. Texas Instruments’ LMX2592 is a low-noise, wideband RF PLL with integrated VCO that supports a frequency range from 20MHz to 9.8GHz.

Products | 14-04-2016

CAN Transceivers with flexible data rate

Texas Instruments’ TCAN33x family of devices is compatible with the ISO 11898 high speed CAN (Controller Area Network) physical layer standard. The TCAN330, TCAN332, TCAN334 and TC

Products | 13-04-2016

Zero-drift amplifiers use proprietary auto-calibration technique

This post is sponsored by Texas Instruments. The TLVx333 series of CMOS operational amplifiers, from Texas Instruments, offer precision performance at a very competitive price.

Products | 12-04-2016

Diode array for USB Type-C and HDMI 2.0 circuit protection

This post is sponsored by Texas Instruments. Texas Instruments’ TPD4E02B04 is a bidirectional TVS ESD protection diode array for USB Type-C and HDMI 2.0 circuit protection. It i

Products | 11-04-2016