Wireless connectivity modules from Texas Instruments have become increasingly popular with Industry 4.0 and IoT developers because advanced integration helps lower development cost
Products | 27-10-2016
The Texas Instruments UCD9090A is a 10-rail PMBus/I2C addressable power supply sequencer and monitor. The device integrates a 12-bit ADC for monitoring up to 10 power supply voltag
Products | 25-10-2016
The OPA2325 device from Texas Instruments is a dual, precision, low-voltage complementary metal oxide semiconductor (CMOS) operational amplifier optimised for very low noise and wi
Products | 24-10-2016
The LMX2491 device, from Texas Instruments, is a low-noise, 6.4GHz wideband delta-sigma fractional N PLL with ramp and chirp generation. It consists of a phase frequency detector,
Products | 21-10-2016
Texas Instruments’ DS280MB810 is an extremely low-power, high-performance eight-channel linear equaliser supporting multi-rate, multi-protocol interfaces up to 28Gbaud. It is used
Products | 20-10-2016
The Texas Instruments’ TPS7A19 is a low-dropout linear regulator (LDO) with a wide input voltage (VIN) range up to 40V, capable of sourcing high output current (IOUT) up to 450mA.
Products | 19-10-2016
The ONET1131EC, from Texas Instruments, is a 2.5V EML modulator driver with transmit clock and data recovery (CDR) designed to operate between 9.8Gbps and 11.7Gbps without the need
Products | 18-10-2016
Texas Instruments’ bq35100 battery fuel gauge and end-of-service monitor provides highly configurable fuel gauging for non-rechargeable lithium primary batteries without requiring
Products | 17-10-2016
The Texas Instruments TPS254900-Q1 device is a USB charging-port controller and power switch with short-to-battery protection. This feature provides protection on OUT, DM_IN and DP
Products | 14-10-2016
The Texas Instruments LM27762 delivers very low-noise positive and negative outputs that are adjustable between ±1.5V and ±5V. Input-voltage range is from 2.7V to 5.5V, and output
Products | 13-10-2016
TPS53667, from Texas Instruments, is a high-current, multi-phase, step-down controller. The device offers built-in non volatile memory (NVM) and PMBus interface. It is compatible w
Products | 12-10-2016
The Texas Instruments UCD90160A is a 16-rail PMBus/I2C addressable power supply sequencer and monitor. The device integrates a 12-bit ADC for monitoring up to 16 power supply vol
Products | 11-10-2016
The Texas Instruments' DRV8704 is a dual-brushed motor controller for industrial equipment applications. The device controls external N-channel MOSFETs configured as two H-bridges.
Products | 10-10-2016
The Texas Instruments' DRV8305-Q1EVM evaluation module (EVM) is a 4.4V to 45V, 25A, three-phase motor drive and control system based on the DRV8305-Q1 automotive motor gate driver,
Products | 07-10-2016