Power conversion modules offer ultra-wide accepts both AC and DC

06-06-2016 | Powerpax | Power

Power Conversion distributor PowerPax launched the Mornsun LHxx-13Bxx, 5 – 25W range of AC/DC converters which accept an AC input range of 85-305VAC (47-63Hz) and a DC Input range of 100-430V DC with six models featuring outputs from 3.3V to 24V DC.

This series offers a high power density in a compact package with industry standard footprints and efficiency of up to 87% with standby power consumption of 0.3 watts maximum.



Outputs require no minimum load and are well regulated with line regulation of ±0.5% and load regulation (10-100% load) of ±1%. Output voltage accuracy is typically ±2% and output ripple & noise (20MHz bandwidth) is typically 50mV peak to peak. All outputs feature continuous (self-recovering) short circuit protection, over current protection (self-recovering) and over voltage protection (shutdown). Modules with output powers of 20W and 25W have an output trim capability of ±10%.



This series meets UL60950, EN60950 and IEC60950 with input to output isolation of 3000V AC (1 minute) minimum. They offer good EMC performance (IEC/EN61000-4 and CISPR22/EN55022) and high reliability, 300K hours (MIL-HDBK-217F@25°C). The modules are housed in a black flame-retardant and heat resistant plastic case that is UL94-V0 rated.

These modules feature an operating temperature range of -40C to +70C, free air convection cooling (de-rating 2%/C -25 to 0C and 2%/C +55 to 70C).



In addition to the PCB mount models there are also variants with mountings enabling the modules to be chassis or DIN Rail mount. This module series is suitable for a wide range of applications including electricity monitoring systems, LED control systems, instrumentation, telecommunications and civil applications.

Related product news