Industrial power-to-board connector range offers many options
23-02-2015 |
Mouser Electronics
|
Connectors, Switches & EMECH
Mouser now offers from stock, three versatile Amphenol high-current
power-to-board connector ranges - PowerBlok, RADSERT and PGY.
PowerBlok provides a high-current single-point connection to the PCB with
the proven reliability of compliant pin signals. The PowerBlok is designed
to bring up to 70A to the board, utilizing a custom 3mm RADSOK design. The
compliant pins press-fit into the board to secure a solid connection and
even signal flow.
RADSERT are used where the most power is needed in a single-point connection
to the PCB. The RADSERT allows the board designer to bring power to the
board from busbars suspended above the board and all of the board
components. Pins from the busbar plug into the RADSOK's which are installed
by press fitting the RADSOK into the RADSERT.
The PGY is an orthogonal card edge connector series, available in 3.6mm and
5.7mm contact sizes. The 5.7mm PGY is Amphenol's highest current board level
product rated to 120A. It connects to the board through a solder reflow
process.