Pluggable spring-clamp connectors enable rapid and reliable installations

Now available from Farnell element14, the Metz Connect SP06 range of pluggable spring clamp connectors allow users to make rapid and reliable wiring installations. Proprietary 'Push In' technology allows solid core cables and stranded cables with ferrules to be inserted directly in to the connector without the need for any tools. In addition to the huge time saving that can be achieved in this process, the spring clamp technology also offers a connection that is resistant to vibration and therefore 'maintenance-free'. Available in 3.5mm, 3.81mm, 5mm, and 5.08mm pitches and from 2 poles - 12 poles, the connectors accept conductor sizes from 0.08sqmm up to 2.5sqmm. Customised solutions with individual pole printing and different coloured options are available. For applications where increased levels of vibration are present or additional connector security is required, the SP06 series offers options with a 'screw flange'. The screw on either side of the connector offers additional retention to the mating PCB header to ensure that the connector cannot be accidentally disconnected. The range of mating PCB Headers is available in top and side entry versions with or without the screw flange. Also available in 2-12 pole versions these products are available in two options. They are suitable for wave solder process or for through-hole reflow (THR) solder process. The THR PCB Headers meet the IPC/JEDEC J-STD-020D-MSL1 standard and can be supplied in tape on reel, says the company.